Honeywell touchpoint Pro User Manual

MAN0923_Issue 3_04/15 Touchpoint Pro
Operating Instructions
12
1.2 Safety Hazards
Thefollowingspecichazardsareassociatedwiththeuseofthisequipment:
Danger – Ignition Hazard
The Touchpoint Pro Controller is NOT ATEX/IECEx safe, and it may only
be installed in safe areas where there are no ammable atmospheres, and no
oxygen concentrations >25% v/v O
2
.
TheTouchpointProrangeincludesawallmountedenclosurethatiscertiedas
ATEX/IECEx Zone 2, Class I Div 2 and Class I (Zone 2) safe, but this enclosure can
only be installed as a remote unit.
ATEXcertiedcomponentsmaybeusedwithintheTouchpointPro,andthesebear
the ATEX imprint shown to the left.
Warning – Lethal Voltage present
All power supplies must be hard wired and must include a circuit breaker (RCD /
RCCB), and (close by and unobstructed) a means of manually isolating and locking
out the power supply without breaking the true earth (ground) connection.
Removable plug and socket connection is not permitted under any circumstance.
Warning – Lethal Voltage present
Lethal voltage may be present in this equipment when electrical power is applied.
There is a danger of death or injury from electrical shock. Isolate power before
opening electrical access panels. Ensure residual current is fully discharged before
touching live terminals.
Warning – Lethal Voltage present
Lethal voltage may be present both internally and externally to the system.
All installations, including cabinets, racks and remote units, must be connected
to true earth, and must be capable of staying earthed (grounded) when the power
supply is interrupted.
The Protective Earth (Ground) symbol is shown on the left, and it always has a green
background.
Do not confuse it with the chassis earth symbols shown below it.
Warning – Toxic Waste and Harmful By-products
Toxic waste and harmful by-products may accumulate within parts of the system.
Suitable respiratory, eye and skin protection should be worn when servicing these
items. Stringent industrial hygiene precautions should also be taken. Do not allow
non-essential personnel into the work area.
The Touchpoint Pro system and/or its sensors may become contaminated by
the ambient environment in which it or they are used. It is the Customer’s sole
responsibility to ensure that all appropriate safety precautions are taken before
handling any components or transferring them to any other party.
1. Safety and Information

Honeywell touchpoint Pro Specifications

General

Brand	Honeywell
Model	touchpoint Pro
Category	Control Systems
Language	English