Honeywell touchpoint Pro - Location and Description of Warning Labels; Safety Warning Labels

MAN0923_Issue 3_04/15 Touchpoint Pro
Operating Instructions
14
1. Safety and Information
WARNING
ISOLATE SUPPLIES BEFORE
SERVICING OR MAINTENANCE
AVERTISSEMENT
ISOLER FOURITURES AVANT
DE PROCÉDER Á L’ENTRETIEN
OU LA MAINTENANCE
WARNING
HAZARDOUS LIVE CIRCUIT
AVERTISSEMENT
DANGEREUX CIRCUIT DIRECT
1.3 Location and Description of Warning Labels
1.3.1 Safety Warning Labels
Warninglabelsaremountedinspeciedlocationsontheequipment.Thisistoindicateconditionsunder
which the user could be subjected to electrical hazards.
Figure 1 – International Warning Label
Figure 3 – Protective Earth (Ground) Point
This Protective Earth (Ground) Location Point
label is used inside the system and is not normally
visible to the operator.
Figure 4 – Equipment Earth (Ground) Point
This Equipment Earth (Ground) Location Point
label is used inside the system and is not normally
visible to the operator.
Figure 2 – Warning Label