Honeywell touchpoint Pro User Manual

MAN0923_Issue 3_04/15 Touchpoint Pro
Operating Instructions
8
1. Safety and Information
TheEquipmentreferredtointhismanualcontainscomponentsandassembliesthatareeachcertiedfor
useinavarietyofdifferingenvironments,anditisthesiteowner’sresponsibilitytoconrmthesuitabilityof
the equipment prior to its installation and use.
TheEquipmentassembliesreferredtointhismanualarecollectivelycertiedforuseinaammablegas
detectionsystemonly.Anyotheruseisnotcurrentlycertiedandisnotauthorisedbythemanufacturer.
For installation in Canada and the USA, for both ordinary and hazardous locations, all connections, cabling,
overcurrent protection and installations must strictly adhere to both the National Electrical Code (NEC) and
the Canadian Electrical Code (CEC).
Please check the product rating plate and look for the following marks to ensure that the supplied
equipment is suitable for its intended location and purpose:
Products bearing the CE mark conform to all applicable European Directives as stated on the
HoneywellproductspecicECDeclarationofConformity.
Products bearing the CSA mark conform to the requirements for Ordinary Locations, and where
marked on components and apparatus, Zone 2 and Division 2 Hazardous Locations.
Products, components and apparatus bearing the ATEX Explosion Protection mark conform to the
requirements for Zone 2 Potentially Explosive Atmospheres.
WARNING
FOR SAFETY REASONS THIS EQUIPMENT MUST BE OPERATED BY QUALIFIED PERSONNEL
ONLY. READ AND UNDERSTAND THE INSTRUCTION MANUAL COMPLETELY BEFORE
OPERATING OR SERVICING THE EQUIPMENT.
ATTENTION
POUR DES RAISONS DE SÉCURITÉ, CET ÉQUIPEMENT DOIT ÊTRE UTILISÉ, ENTRETENU
ET RÉPARÉ UNIQUEMENT PAR UN PERSONNEL QUALIFIÉ. ÉTUDIER LE MANUEL
D’INSTRUCTIONS EN ENTIER AVANT D’UTILISER, D’ENTRETENIR OU DE RÉPARER
L’ÉQUIPEMENT.

Honeywell touchpoint Pro Specifications

General

Brand	Honeywell
Model	touchpoint Pro
Category	Control Systems
Language	English