Honeywell touchpoint Pro User Manual

MAN0923_Issue 3_04/15 Touchpoint Pro
Operating Instructions
155
11. Certication
11.1 EC declaration of conformity
A full EC declaration of conformity is available on the CD accompanying the product. This document lists
the European Standards with which the Touchpoint Pro complies.
WARNING
Only the combustible gas detection portion of this instrument has been assessed for performance
in accordance with the ATEX Directive.
AVERTISSEMENT
Seulement la partie détection de gaz explosif de cet équipement a fait l’objet de tests de
performance métrologique suivant la directive ATEX.
WARNING
CSA performance is only valid when connected to Honeywell Model 705 Catalytic Gas Detectors
or suitably approved 4 – 20 mA Gas Detectors.
AVERTISSEMENT
La performance en conformité avec la CSA est valide uniquement lorsque l’appareil est connecté
aux détecteurs de gaz catalytiques Honeywell modèle 705 ou à des détecteurs de gaz 4 - 20 mA
dûment approuvés.
11.2 Applicable National and International Standards
The Touchpoint Pro systems described in this manual are declared to conform to the following National and
InternationalStandardswheninstalledandoperatedinaccordancewiththeManufacturer’sspecications
and stipulations:
Ordinary Location Standards Zone 2 Div. 2 Hazardous Location Standards
CAN/USA – C22.2 No. 61010-1
CSA 22.2 No. 152
UL Std – No. 61010-1
EN/IEC 61010-1
FM 6310 & 6320
ANSI/ISA –12.12.01
CAN/CSA C22.2 No. 60079-0
CAN/CSA C22.2 No. 60079-15
CSA C22.2 No. 0-M
CSA C22.2 No. 213-M
EN/IEC 60079-0
EN/IEC 60079-15
UL 60079-0
UL 60079-15
FM 6310 & 6320

Honeywell touchpoint Pro Specifications

General

Brand	Honeywell
Model	touchpoint Pro
Category	Control Systems
Language	English