Honeywell touchpoint Pro User Manual

MAN0923_Issue 3_04/15 Touchpoint Pro
Operating Instructions
156
11. Certication
11.3 National and International Certicates
The Touchpoint Pro Zone 2 Div. 2 Systems and System Components hold the following National and
InternationalCerticatesandCerticationCodes:
Description Certicates
Remote Wall Mount Zone 2/Div 2 Enclosure and ROM
ATEX/IECEx:
II 3G Ex nA nC IIC T4 Gc
(ROM) Tamb –40 °C to +70 °C
(Enclosure) Tamb –40 °C to +xx °C
(xx is dependent on customisation – see Rating Plate)
CSA US/CAN:
Class I, Div 2, ABCD T4
Class I, Zone 2, AEx nA nC IIC T4
Class I, Zone 2, Ex nA nC IIC T4
(ROM) Tamb –40 °C to +70 °C
(Enclosure) Tamb –40 °C to +xx °C
(xx is dependent on customisation – see Rating Plate)
AIM mA, AIM mV, DIM, RCM and Backplanes
II 3G Ex nA IIC T4 Gc
Class I, Div 2, ABCD T4
Class I, Zone 2, AEx nA IIC T4
Class I, Zone 2, Ex nA IIC T4
Tamb –40 °C to +70 °C
AIM mA
SIRA 15ATEX4028U
IECEx SIR15.0015U
CSA 70004992
AIM mV
SIRA 15ATEX4029U
IECEx SIR15.0016U
CSA 70025468
DIM
SIRA 15ATEX4030U
IECEx SIR15.0017U
CSA 70025478
ROM
SIRA 15ATEX4031U
IECEx SIR15.0018U
CSA 70025950
RCM
SIRA 15ATEX4032U
IECEx SIR15.0019U
CSA 70025951
Backplanes
SIRA 15ATEX4033U
IECEx SIR15.0020U
CSA 70025953
Remote Wall Mounted Zone 2/Div 2 Enclosure
SIRA 15ATEX4034X
IECEx SIR15.0021X
CSA 70030437

Honeywell touchpoint Pro Specifications

General

Brand	Honeywell
Model	touchpoint Pro
Category	Control Systems
Language	English