HP 1920 Gigabit Ethernet Switch Series User Manual

169
d. Select the PVID box and enter 2 in the field.
e. Select GigabitEthernet 1/0/1 from the chassis front panel.
f. Click Apply.
Figure 163 Configuring GigabitEthernet 1/0/1 as a hybrid port
3. Assign GigabitEthernet 1/0/1 to VLAN 2 as an untagged member:
a. Select Network > VLAN from the navigation tree.
b. Click the Modify Port tab.
c. Select GigabitEthernet 1/0/1 from the chassis front panel.
d. Select the Untagged option.
e. Enter VLAN ID 2.
f. Click Apply.
A configuration progress dialog box appears.
g. After the configuration process is complete, click Close.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English