HP 1920 Gigabit Ethernet Switch Series User Manual

340
d. Click Apply.
The RADIUS Server Configuration area displays the primary authentication server you have
configured.
3. Configure the backup authentication server in the RADIUS scheme:
a. In the RADIUS Server Configuration area, click Add.
b. Select the server type Backup Authentication.
c. Enter the IP address 10.1.1.2, and enter the port number 1812.
d. Click Apply.
The RADIUS Server Configuration area displays the backup authentication server you have
configured.
4. Configure the primary accounting server in the RADIUS scheme:
a. In the RADIUS Server Configuration area, click Add.
b. Select the server type Primary Accounting.
c. Enter the IP address 10.1.1.2, and enter the port number 1813.
d. Click Apply.
The RADIUS Server Configuration area displays the accounting server you have configured.
5. Configure the secondary accounting server in the RADIUS scheme:
a. In the RADIUS Server Configuration area, click Add.
b. Select the server type Backup Accounting.
c. Enter the IP address 10.1.1.1, and enter the port number 1813.
d. Click Apply.
The
RADIUS Server Configuration area di
splays the backup accounting server you have
configured.
6. On the RADIUS configuration page, click Apply.
Configuring AAA for the scheme
1. Create an ISP domain:
a. From the navigation tree, select Authentication > AAA.
The Domain Setup page appears.
b. Select test from the Domain Name list, and select Enable from the Default Domain list.
c. Click Apply.

HP 1920 Gigabit Ethernet Switch Series Specifications

General

Brand	HP
Model	1920 Gigabit Ethernet Switch Series
Category	Switch
Language	English