9-9
Specifications
HP ESG Series Signal Generators Specifications
Typical FM 1 and FM 2 Frequency Response
Modulation Frequency Response
1
:
Path Rates (deviation = 100 kHz)
1 dB Bandwidth 3 dB Bandwidth (typical)
FM 1: (dc/20 Hz to 100 kHz) dc/5 Hz to 10 MHz
FM 2: (dc/20 Hz to 100 kHz) dc/5 Hz to 1 MHz
1. Since the internal modulation source operates over 0.1 Hz to
50 kHz, FM rates above 50 kHz must be supplied externally.
Carrier Frequency Accuracy
Relative to CW in DCFM
1
:
1. At the calibrated deviation and carrier frequency, within 5° C of ambient
temperature at time of user calibration.
±0.1% of set deviation + (N x 1 Hz)
Distortion (1 kHz rate, THD, Deviations = N x 100 kHz): < 1%
External Inputs: Ext 1 or Ext 2
Sensitivity: 1 Vpk for indicated deviation
To Next Page
Loading...
