HP ESG Series - Page 57

3-14
Troubleshooting
Command Error
-131 Invalid suffix
The suffix does not follow the syntax described in IEEE 488.2,
7.7.3.2, or the suffix is inappropriate for this device.
-134
Suffix too long
The suffix contained more than twelve characters (see IEEE
488.2, 7.7.3.4).
-138
Suffix not allowed
A suffix was encountered after a numeric element which does
not allow suffixes.
-140
Character data error
This error, as well as errors -141 through -149, are generated
when parsing a character data element. This particular error
message is used if the device cannot detect a more specific
error.
-141
Invalid character data
Either the character data element contains an invalid character
or the particular element received is not valid for the header.
-144
Character data too long
The character data element contains more that twelve
characters (see IEEE 488.2, 7.7.1.4).
-148
Character data not allowed
A legal character data element was encountered where
prohibited by the device.
-150
String data error
This error, as well as errors -151 through -159, are generated
when parsing a string data element. This particular error
message is used if the device cannot detect a more specific
error.
-151
Invalid string data
A string data element was expected, but was invalid (see IEEE
488.2, 7.7.5.2). For example, an
END message was received
before the terminal quote character.