8 - 46
HAPSITE ER Operating Manual
Figure 8-93 Top 10 Masses
5 Minimize the NIST window and return to the Data Review screen displaying the
chromatogram.
6 Enter the largest peak, 78 for benzene, into the Control Panel underneath the
Mass column. Press Enter. The RIC plot will be displayed underneath the TIC
window. A new row will be created in the Control Panel for entering additional
peaks. (See Figure 8-94.)
Figure 8-94 Creating a RIC Plot
7 Enter the two or more remaining peaks into the Control Panel.
(See Figure 8-95.)
Figure 8-95 Entering Masses in the Control Panel
NOTE: This RIC window can be closed by unchecking the masses selected in
the Control Panel. (See Figure 8-96.)
To Next Page
Loading...
