Inficon HAPSITE ER - Page 258

8 - 55
HAPSITE ER Operating Manual
Change Plot Color . . . . . . . . . . . . . Changes the color of the TIC plot.
Label Chromatogram . . . . . . . . . . . Displays a text box to label the
chromatogram. The location of the label can
be adjusted with the cursor and saved with
the data file.
Scan Subtract . . . . . . . . . . . . . . . . . Subtracts the current scan from the
displayed RIC plots.
Peaks submenu (See Figure 8-115.)
Figure 8-115 Peaks
Switch to Calibration . . . . . . . . Opens the Calibrate function. See Chapter
11, Calibration.
Switch to ID Unknowns . . . . . . Opens the ID Unknowns function. See ID
Unknowns, see section 11.5 on page 11-24.
Switch to AMDIS . . . . . . . . . . . . Opens the AMDIS program. See section 8.5,
Analyzing Data Using AMDIS, on page 8-16.
Search for Peaks . . . . . . . . . . . Searches the chromatogram for peaks.
Performs the same function as
Show/Update Current Peaks. Refer to
section 8.7, Show/Update Current Peaks, on
page 8-28.
Show/Update Current Peaks . . Searches the chromatogram for peaks. Refer
to section 8.7, Show/Update Current Peaks,
on page 8-28.
Edit Base Points . . . . . . . . . . . . To move the base point, double-click on the
desired new location for the base point. This
function is used to manually reintegrate the
peak.