9 - 2
HAPSITE ER Operating Manual
3 Wait until the EM and Emission buttons on the Control Panel turns green.
Click the Tune icon. (See Figure 9-3.)
Figure 9-3 Tune icon
Adjusting other parameters without proper training may
damage the instrument.
4 Allow HAPSITE ER to AutoTune. When AutoTune is finished, the message
Final Results are on the LCD will be displayed. Click OK. (See Figure 9-4.)
Figure 9-4 AutoTune complete
5 Close the manual tune screen by clicking the X on the top right corner.
Figure 9-5 Close the manual tune screen
To Next Page