3 - 10
HAPSITE ER Operating Manual
8 Once inserted, release the PUSH lever. (See Figure 3-14.)
Figure 3-14 Releasing the PUSH Lever
9 Gently pull the carrier gas canister outwards. It should remain fastened inside
HAPSITE ER. (See Figure 3-15.)
Figure 3-15 Carrier Gas Installation Verification
NOTE: The position of the gas canisters should not be interchanged. To prevent
improper placement, the internal standard canister has a Teflon
®
ring
which surrounds the inner stem on the top of the can. Do not force the
canisters into the wrong location as this will contaminate and/or damage
HAPSITE ER. (See Figure 3-16.)
Figure 3-16 Inner Stem of Canisters
Internal
Standard
Carrier Gas
To Next Page
Loading...
