4 - 28
HAPSITE ER Operating Manual
7 Move the probe away from the sample when the screen prompts, Sampling is
Done. (See Figure 4-46.)
Figure 4-46 Sampling Done on Concentrator Run
8 By touching CMPD ID, a list of found compounds will be displayed. (See Figure
4-47.) This page will display for each compound:
The CAS number
The Fit
The retention time
TIC (Total Ion Count) Max,
The current TIC
The time left until the run finishes
NOTE: Touching a compound on the list will display its Synonym and
Exposure Limit information if it is contained in the NIOSH database.
8a The CMPD ID screen can also be accessed by using the arrow keys to
highlight CMPD ID and pushing OK SEL.
Figure 4-47 Sample Compound Identification For Concentrator
To Next Page
Loading...
