4 - 39
HAPSITE ER Operating Manual
16 The Qualitative Report can be found by touching the QUAL key. (See Figure
4-66.) Alternately, highlight the QUAL key and push OK SEL. For each
compound found, information regarding the Net Fit, the retention time, the CAS
number, the area and the number of hits will be displayed.
Figure 4-66 Qualitative Report
17 The Quantitative Report can be found be touching the QUANT key. (See Figure
4-67.) Alternately, highlight the QUANT key and push OK SEL. For each
compound found, information regarding the target ion, the retention time, the
Net Fit, the purity, the area and the concentration will be displayed.
Figure 4-67 Quantitative Reports
NOTE: If the method is not quantitative, the message “No quant reports
found” will be displayed on the QUANT report screen. To determine if
the method is quantitative, see the box in the bottom right hand corner
of the main screen. (See Figure 4-68.)
To Next Page
Loading...
