Inficon SQC-310

5 - 15
PN 074-550-P1D
SQC-310 Operating Manual
Used By . . . . . . . . . . . . . . . . . . . . . . Indicates if a relay function is defined by a
sensor, source, or logic statement. A relay
can be controlled by only a single function.
Function is automatically designated by
SQC-310 and cannot be edited.
If the Show Inputs button is selected, All inputs and pertinent information will be
displayed in columns that can be edited (see Figure 5-11).
Figure 5-11 Digital I/O Setup menu - Show Inputs
Name . . . . . . . . . . . . . . . . . . . . . . . . A descriptive name for the input. For inputs
that have been assigned in SQC-310, this
will overwrite the SQC-310 assigned default
name. However, the function of the input
remains as originally defined by SQC-310.
The input name can be returned to its default
by selecting the relay on the SQC-310
System/Inputs menu and pressing Set to
Default (refer to section 3.12.1 on page
3-27).
Active Level . . . . . . . . . . . . . . . . . . The level, high (5 V) or low (0 V) that triggers
the input.
Input # . . . . . . . . . . . . . . . . . . . . . . . The physical input assigned to this logical
input function.