3 - 11
PN 074-550-P1C
SQC-310 Operating Manual
Selecting Edit on the Process Select menu displays the sequence of layers that
will be deposited in the selected process (see Figure 3-6). Scrolling and selecting
a layer is done by rotating the control knob.
Figure 3-6 Layer Select menu
Delete Deletes the selected process and all of its layers. A prompt
will follow if delete is selected to safeguard against accidental
process deletion.
Copy/Paste Copies the selected process and all of its layers. Scroll to an Empty
process and press Paste to paste the copied process and
corresponding film name. The Paste button will be displayed after
the Copy button is pressed.
Create When an empty process is selected, creates a new process.
Control Knob Rotate the control knob counterclockwise or clockwise to change
the selected process. Press the control knob button to select a
process for editing.
Table 3-6 Layer Select menu buttons
Main Screen Returns to the Main screen Menu 3.
Prev
Menu
Returns to the Process Select menu.
Edit... Displays the Layer Edit menu for the selected layer (see Figure
3-7).
Table 3-5 Process Select menu buttons (continued)
To Next Page
Loading...
