Chapter 5: Console Operation
Output Channels: UM8 Processed Outputs
Eclipse User Guide 2.0 183/ 526
Setting Geq Options for All Pages of a Show
For the ON and Scale (+/-6 or +/-18) buttons, you can apply the
same setting across all Pages within the console’s memory. For
example, to set the Graphic EQ on or off for a particular bus for
the entire show.
Note that this affects the Pages in memory only. To save the
changes permanently, make sure you save your File.
1. Set the option to the desired status – for example, select
the ON button.
2. Then click and hold on the option.
3. Keep holding and a confirmation box appears.
4. Press OK and the setting will be applied across all
Pages in memory.
To Next Page
Loading...
