Chapter 6: Console Configuration
Ethersound Networks
Eclipse User Guide 2.0 273/ 526
Other Ethersound Devices
In addition to DioCores, other Ethersound devices may be
connected to the network. Each device is automatically
detected by the Primary Master; there is no limit on the number.
However, remember that the 64 Ethersound channels to and
from the console must be shared between all ES devices and
any DioCores.
I/O patching can be controlled for any Ethersound device on the
network. In addition, the Nova software supports parameter
control for specially supported Ethersound devices. These
include Digigram’s Aqonda 16, Innovason’s SR-16 and
Neumann’s DMI-8.
Connecting an Ethersound Device
In a standard network, insert each device into the middle of the
chain. This keeps Eclipse as the Primary Master and M.A.R.S.
as the last device:
To Next Page
Loading...
