Chapter 6: Console Configuration
Fast Configuration
Eclipse User Guide 2.0 319/ 526
3. Once you have made your selections, you have two
options:
• Select APPLY to apply the settings to the current mix.
The current mix is updated and an INFO pop-up appears briefly
confirming the operation.
• Select EXIT if you do not wish to update the current mix,
but apply the settings to new channels.
The Fast Configuration window closes without updating the
current mix but retains your selections. Whenever you create a
new input, Aux, Group Matrix or Master, then these default
settings will be applied.
4. To clear the Fast Configuration parameters, open the
window, deselect the on-screen buttons and then select
EXIT:
From here on, no default parameters will be applied to new
channels.
To Next Page
Loading...
