Chapter 6: Console Configuration
User Defined Panel
Eclipse User Guide 2.0 331/ 526
Tempo
Adjusts and sends a tempo to any internal Multitap delay FX
processor set to autofit mode, see Page 516.
Note that you can also tap in a tempo using the Tap Tempo
switch function described on the next page.
1. Turn the rotary control to preselect the tempo.
An INFO pop-up appears confirming the current value.
2. Then press down on the control to send this value.
The tempo is transmitted to all Multitap delays set to autofit
mode.
To Next Page
Loading...
