Chapter 2: Installation
Audio Connections
54/ 526 2.0 Eclipse User Guide
DSP Card Line I/O (standard)
This card includes 16 Line Inputs and 16 Line Outputs (without
DSP) on four DSub connectors.
Every line level input is electronically balanced and feeds a 24-
bit Sigma-Delta A/D converter directly. The nominal input level
is fixed at 4dBu with scale is at 22dBu. It is not possible to alter
this.
Four XLR interface cables are supplied with the console to
provide balanced XLR-F and XLR-M connections to the 16 I/O.
Headphones and Talkback (standard)
On the front of the console you will also find:
• ¼” stereo jack – headphone output.
• XLR – talkback input.
These connections are used for the console’s Headphone
monitoring, see Page 210, and engineer talkback, see Page
218.
To Next Page
Loading...
