8 ADDITIONAL FUNCTIONS DACS-W Operation Manual
8-6
Table 8-3 Installation Engineer Level Functions (3)
Key Display Function
System
Configuration
Dynamic Calibration Set to ON when Dynamic Calibration is used.
[See "8.4.3.6 Dynamic Calibration"]
Preset No. Memorize Defines whether the Preset No. is to be memorized and automatically
set at next power up. [See "8.4.3.7 Preset Number Memorize"]
Gap Control Defines whether gap control function is used. [See "8.4.3.8 Gap
Control"]
Preset Copy Used to copy data from one preset to another. [See "8.4.4 Preset
Copy"]
Date/Time
Setting
Date Setting Used to set date. [See "8.4.5.1 Date Setting"]
Time Setting Used to set time. [See "8.4.5.2 Time Setting"]
Level 1&2
Passwords
Setting
Level 1 Password Setting Used to set Site Engineer level password. [See "8.4.6.1 Site
Engineer Level (Level 1) Password Setting"]
Level 2 Password Setting Used to set Installation Engineer level password. [See "8.4.6.2
Installation Engineer Level (Level 2) Password Setting"]
SET
UP
To Next Page
Loading...
Need help?
General