Table 23: show ip bgp Output Fields (continued)
Field DescriptionField Name
Prefix for the routing table entryPrefix
Peer from which route was learnedPeer
IP address of the next router that is used when a packet is forwarded
to the destination network
Next hop IP address
Multiexit discriminator for the routeMED
Local preference for the routeLocPrf
Weight of the routeWeight
Origin of the routeOrigin
AS path through which this route has been advertisedAS path
Community number associated with the routeCommunities
Routes that have gone stale due to peer restartStale
Number of unicast routes in the BGP routing table that have been
inserted into the IP routing table that are also available for use in
the multicast view of the IP routing table
unicast/multicast routes
selected for route table
installation
Number of unicast and multicast routes in the BGP routing table
that have been inserted into the IP routing table that are also
available for use in the IP tunnel routing table
unicast/multicast
tunnel-usable routes
selected for route table
installation
Number of routes in the BGP routing table that have been inserted
into the IP tunnel routing table
tunnel-only routes selected
for tunnel-route table
installation
Number of distinct path attributes stored in BGP's internal path
attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in
its internal path attribute table and share it between the two routes
to conserve memory.
path attribute entries
Timestamp indicating when the statistics baseline was last setStatistics baseline set
Related Topics Monitoring the BGP Routing Table on page 162•
• default-fields route
161Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Monitoring BGP
To Next Page
Loading...