Table 122: show bridge interface vpls Output Fields (continued)
Field DescriptionField Name
Number of octets transmitted on this interfaceOut Octets
Number of frames transmitted on this interfaceOut Frames
Number of outgoing packets discarded on this interfaceOut Discards
Number of outgoing errors on this interfaceOut Errors
Elapsed time since statistics counters were last resetTime since counters last
reset
Hardware packet queue associated with the specified traffic class
and interface
queue
Length of the queue, in bytesQueue length
Number of packets and bytes forwarded on this queueForwarded packets, bytes
Number of committed packets and bytes that were droppedDropped committed
packets, bytes
Number of conformed packets and bytes that were droppedDropped conformed
packets, bytes
Number of exceeded packets and bytes that were droppedDropped exceeded
packets, bytes
Identifies the VPLS virtual core interface for the VPLS instancevpls vplsName
Related Topics show bridge interface vpls•
Monitoring Configuration, Statistics, and Status for VPLS Ports
Purpose Display configuration, statistics, and status information for ports (interfaces) associated
with a VPLS instance.
Action To display information for VPLS ports:
host1#show bridge vplsC port
FastEthernet1/1.1
Port Number: 1
Operational Status: Up
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: samplepolicy
Statistics:
621Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Monitoring VPLS
To Next Page
Loading...
Need help?
General
