Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Statistics:
In Octets: 0
In Frames: 0
In Discards: 0
In Errors: 0
Out Octets: 0
Out Frames: 0
Out Discards: 40
Out Errors: 0
Time since counters last reset: 01:04:10
To display a summary of all interfaces configured for the specified VPLS instance:
host1#show bridge vplsB interface brief
Interface Port Status
------------------------- ------ ------------
FastEthernet1/1.1 1 Up
ATM10/1.1.1 2 Up
vpls vplsB 3 Up
Meaning Table 120 on page 618 lists the show bridge interface command output fields.
Table 120: show bridge interface Output Fields
Field DescriptionField Name
Name of the VPLS instance to which the interface belongsBridgeGroup
Port number on which this interface residesPort Number
Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
Operational Status
State of the physical interface: Up, DownAdmin Status
Whether SNMP link status processing is enabled or disabled for the
specified interface
Snmp Link Status Trap
Maximum number of dynamic MAC addresses that the interface
can learn
Max Learn
Name of the subscriber policy currently in effect for the interfaceSubscriber Policy
Displays statistics information for the specified portStatistics
Number of octets received on this interfaceIn Octets
Number of frames received on this interfaceIn Frames
Number of incoming packets discarded on this interfaceIn Discards
Number of incoming errors received on this interfaceIn Errors
Number of octets transmitted on this interfaceOut Octets
Copyright © 2010, Juniper Networks, Inc.618
JunosE 11.2.x BGP and MPLS Configuration Guide

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English