Table 99: show mpls l2transport load-balancing-group Output Fields
Field DescriptionField Name
Identifies address of the router at the other end of the tunnel and
the base tunnel that is selected to forward the traffic
routed to/base LSP
Group numberload-balancing group
Martini group ID number for the interfaceMartini group-id
State of the interfacestate
VC ID number for the interfacevc-id
Maximum transmission unit for the intermtu
Label sent to upstream neighbor for route; statistics below this field
are the aggregate statistics for traffic from the core
In label
Label received from downstream neighbor for route; statistics below
this field are the aggregate statistics for traffic to the core
Out label
Number of packets sent across tunnelpkts
Number of high-capacity (64-bit) packets sent across tunnelhcPkts
Number of octets sent across tunneloctets
Number of high-capacity (64-bit) octets sent across tunnelhcOctets
Number of packets dropped for some reason before being senterrors
Number of the queue for which statistics are being displayed and
whether the queue is under traffic class control
queue 0
Name of traffic classtraffic class
Interface to which queue is boundbound to
Size of queue in length and bytesQueue length
Number of forwarded packets and bytesForwarded
Number of committed packets and bytes droppedDropped committed
Number of conformed packets and bytes droppedDropped conformed
Number of exceeded packets and bytes droppedDropped exceeded
Number of packets discarded due to lack of buffer space before
being sent
discardPkts
Copyright © 2010, Juniper Networks, Inc.504
JunosE 11.2.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
