EasyManuals Logo
Home>Juniper>Software>JUNOSE 11.2.X BGP AND MPLS

Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Juniper JUNOSE 11.2.X BGP AND MPLS
742 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #466 background imageLoading...
Page #466 background image
Imported routes point to the same interface and next hop as the original route. Shared
IP interfaces are not created.
Table 89 on page 430 lists additional characteristics of import and global import maps.
Table 89: Characteristics of Import and Global Import Maps
Global ImportImportCharacteristic
–YesDistributes routes from the global BGP VPN RIB local to the VR. This
RIB is often referred to as the core VPN RIB.
Yes–Distributes routes from the global BGP non-VPN RIB local to the
VR. This RIB is often referred to as the core non-VPN RIB or core RIB.
YesYesImports all types of routes (received routes, redistributed routes,
network routes, aggregate routes, and auto-summary routes).
YesYesImports both best and non-best routes. The best route selection
(including the decision to use or not use ECMP) is made in the VRF
after the routes are imported.
Characteristics of Export and Global Export Maps
Export maps and global export maps can export both labeled and unlabeled routes. If
you want to export only one or the other, you can use a match mpls-label command in
the export or global export route map.
Table 90 on page 430 lists additional characteristics of export and global export maps.
Table 90: Characteristics of Export and Global Export Maps
Global ExportExportCharacteristic
–YesDistributes routes to the global BGP VPN RIB local to the VR. This
RIB is often referred to as the core VPN RIB.
Yes–Distributes routes to the global BGP non-VPN RIB local to the VR.
This RIB is often referred to as the core non-VPN RIB or core RIB.
–YesExports all types of routes (received routes, redistributed routes,
network routes, aggregate routes, and auto-summary routes).
Yes–Exports only locally originated routes (all routes other than those
that have been received).
YesYesExports both best and non-best routes. The best route selection is
made again in the core after the export.
Subsequent Distribution of Routes
Routes that are imported from the global BGP non-VPN RIB (with a global import map)
into a VRF RIB are never exported again. Because these routes are not exported to the
Copyright © 2010, Juniper Networks, Inc.430
JunosE 11.2.x BGP and MPLS Configuration Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOSE 11.2.X BGP AND MPLS and is the answer not in the manual?

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General IconGeneral
BrandJuniper
ModelJUNOSE 11.2.X BGP AND MPLS
CategorySoftware
LanguageEnglish

Related product manuals