Table 64: show ldp binding and show mpls binding Output Fields
Field DescriptionField Name
Label sent to upstream neighbor for displayed routeIn
Label received from downstream neighbor for displayed routeOut
IP address of neighbor to which the label is sent or receivedneighbor
Label that indicates neighbor has restartedstale
Related Topics show ldp binding•
• show mpls binding
Monitoring LDP Graceful Restart
Purpose Display information about LDP graceful restart.
Action To display information about LDP graceful restart:
host1#show ldp graceful-restart
LDP Graceful Restart is enabled
Helper Mode is enabled
Reconnect Time: 220 sec
Recovery Time: 240 sec
Max Recovery Time: 260 sec
Neighbor Liveness Timer: 280 sec
Peer 80.0.1.1:0, State: operational, Restarter Mode: disabled, Helper Mode:
enabled
Peer 80.0.3.3:0, State: operational, Restarter Mode: disabled, Helper Mode:
enabled
NOTE: The mpls keyword is optional and is provided for compatibility with non–E Series
implementations.
Meaning Table 65 on page 333 lists the show ldp graceful restart command output fields.
Table 65: show ldp graceful restart Output Fields
Field DescriptionField Name
State of graceful restart, enabled or disabledLDP Graceful Restart
State of graceful restart helper mode, enabled or disabledHelper Mode
Locally configured value for reconnect time, in secondsReconnect Time
Locally configured value for recovery time, in secondsRecovery Time
333Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Monitoring MPLS
To Next Page
Loading...
Need help?
General
