To Next Page

To Previous Page

Table 119: show bridge groups details Output Fields (continued)

Field DescriptionField Name

Maximum number of dynamic MAC addresses that the VPLS

instance can learn

Max Learn

Whether SNMP link status processing is enabled or disabledLink Status Snmp Traps

Name of the subscriber policy currently in effectSubscriber Policy

Number of ports currently configured for the VPLS instance,

including network interfaces and the VPLS virtual core interface

Port Count

Number of network interfaces currently configured for the VPLS

instance

Interface Count

Name of the transport virtual router configured for the VPLS instanceTransport Virtual Rtr

Unique route distinguisher configured for the VPLS instanceRoute Distinguisher

Site name configured for the VPLS instanceSiteName

Numerical site identifier configured for the VPLS instanceSiteId

Status of the site. Yes designates a multihomed site. No designates

a site that is not multihomed.

Multi-homed

Priority value for the VPLS instance for the multihomed site;

displayed only when the value for the Multi-homed field is Yes

Site-Priority

Maximum number of sites that can participate in the VPLS domain

associated with the VPLS instance

SiteRange

Extended community identifiers, also known as route targets, for

each VPLS instance configured on the router

VPLS Route Targets

Index of the MPLS next hop to which the router floods packets with

unknown destination addresses. For more information about

displaying MPLS next hops and any available next-hop statistics,

see “Monitoring MPLS Next Hops” on page 355.

Flood Next Hop

Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Questions and Answers: