host1#show bridge interface atm 3/1.10
atm3/1.10
BridgeGroup: vplsB
Port Number: 1
Operational Status: Up
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Trunk
Statistics:
In Octets: 1958
In Frames: 14
In Discards: 1
In Errors: 0
Out Octets: 1930
Out Frames: 14
Out Discards: 1
Out Errors: 0
Time since counters last reset: 00:14:32
queue 0: traffic class best-effort, bound to bridge ATM3/1.10
Queue length 0 bytes
Forwarded packets 14, bytes 2238
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
To display information about all interfaces in a VPLS instance, including the VPLS virtual
core interface (vplsB):
host1#show bridge vplsB interface
FastEthernet1/1.1
Port Number: 1
Operational Status: Up
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: samplepolicy
Statistics:
In Octets: 3770
In Frames: 27
In Discards: 0
In Errors: 0
Out Octets: 3682
Out Frames: 27
Out Discards: 0
Out Errors: 0
Time since counters last reset: 01:07:08
queue 0: traffic class best-effort, bound to bridge FastEthernet1/1.1
Queue length 0 bytes
Forwarded packets 27, bytes 3898
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
vpls vplsB
Port Number: 2
Operational Status: Down
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Trunk
617Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Monitoring VPLS
To Next Page
Loading...
Need help?
General
