Table 26: show ip bgp advertised-routes Output Fields (continued)
Field DescriptionField Name
IP address of BGP peerPeer
IP address of the next hopNext hop IP address
Multiexit discriminator for the routeMED
Local preference for the routeLocPrf
Assigned path weightWeight
Origin of the routeOrigin
Related Topics show bgp ipv6 advertised-routes•
• show ip bgp advertised-routes
Monitoring BGP Aggregate Addresses
Purpose Display information about aggregate addresses.
The show ip bgp aggregate-address and show bgp ipv6 aggregate-address commands
display similar information.
Action To display information about aggregate addresses:
host1# show bgp ipv6 aggregate-address
Prefix AS set Summ only Attribute map Advertise map Suppress map
3ffe::/48 No No None None None
Meaning Table 27 on page 169 lists the show bgp ipv6 aggregate-address command output fields.
Table 27: show bgp ipv6 aggregate-address Output Fields
Field DescriptionField Name
Prefix of the aggregate addressPrefix
ASs in the AS-set pathAS set
Displays a summary of aggregate address informationSummary only
Displays the attribute maps for aggregate addressesAttribute map
Displays the advertise maps for aggregate addressesAdvertise map
Displays the suppressed maps for the aggregate addressesSuppress map
169Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Monitoring BGP
To Next Page
Loading...
Need help?
General
