Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Table 124: show bridge port brief Output Fields
Field DescriptionField Name
Port number on which this interface residesPort
Interface type and specifier associated with the portInterface
Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
Status
Related Topics show bridge port•
Monitoring MAC Address Entries for a Specific VPLS Instance
Purpose Display information about the MAC address entries in the forwarding table for the specified
VPLS instance.
Action To display information about the MAC address entries:
host1#show bridge vpls1 table
Bridge: vpls1 MAC Address Table
Address Action Interface Age
-------------- -------------------- -------------------------- -------
0009.01a0.002e forward ATM10/1.1.1 0
0090.1a41.3aca forward vpls (10) 0
Meaning Table 125 on page 624 lists the show bridge table command output fields.
Table 125: show bridge table Output Fields
Field DescriptionField Name
Name of the VPLS instance for which the MAC address table is
displayed
Bridge
MAC address of the entryAddress
Specifies how the VPLS instance handles this entry: forward or
discard
Action
Interface type and specifier on which the entry is forwarded; this
value does not appear for entries that are discarded; vpls identifies
the VPLS virtual core interface
Interface
Length of time that a dynamic entry has been in the forwarding
table; this value does not appear for static entries
Age
Related Topics show bridge table•
Copyright © 2010, Juniper Networks, Inc.624
JunosE 11.2.x BGP and MPLS Configuration Guide

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English