Table 40: show bgp ipv6 neighbors routes Output Fields (continued)
Field DescriptionField Name
IP address of BGP peerPeer
IP address of the next hopNext hop
Multiexit discriminator for the routeMED
Local preference for the routeLocPrf
Assigned path weightWeight
Origin of the routeOrigin
Related Topics show bgp ipv6 neighbors routes•
• show ip bgp neighbors routes
Monitoring Networks in an Autonomous System
Purpose Display information about networks in an AS.
The show ip bgp network and show bgp ipv6 network commands display similar
information.
Action To display information about networks in an AS:
host1#show bgp ipv6 network
Prefix Weight Route-map Backdoor
3ffe:0:0:2::/64 No
Meaning Table 41 on page 191 lists the show bgp ipv6 network command output fields.
Table 41: show bgp ipv6 network Output Fields
Field DescriptionField Name
Prefix for the routing table entryPrefix
Assigned path weightWeight
Indicates whether network-route filtering is enabledRoute-map
Indicates whether an IGP backdoor route is favored over an EBGP
route
Backdoor
Related Topics show bgp ipv6 network•
• show ip bgp network
191Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Monitoring BGP
To Next Page
Loading...
Need help?
General
