0 hdr errors, 0 addr errors
0 unkn proto, 0 discards
Frags: 0 reasm ok, 0 reasm req, 0 reasm fails
0 frag ok, 0 frag creates, 0 frag fails
Sent: 0 generated, 0 no routes, 0 discards
ICMP statistics:
Rcvd: 0 errors, 0 dst unreach, 0 time exceed
0 param probs, 0 src quench, 0 redirect,
0 echo req, 0 echo rpy
0 timestmp req, 0 timestmp rpy
0 addr mask req, 0 addr mask rpy
Sent: 0 errors, 0 dst unreach, 0 time excd
0 param probs, 0 src qnch, 0 redirect
0 timestamp req, 0 timestamp rpy
0 addr mask req, 0 addr mask rpy
In Received Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
In Forwarded Packets 0, Bytes 0
In Total Dropped Packets 0, Bytes 0
In Policed Packets 0
In Invalid Source Address Packets 0
In Error Packets 0
In Discarded Packets 0
In Fabric Dropped Packets 0
Out Forwarded Packets 0, Bytes 0
Unicast Packets 0, Bytes 0
Multicast Packets 0, Bytes 0
Out Requested Packets 0, Bytes 0
Out Total Dropped Packets 0, Bytes 0
Out Scheduler Drops Committed Packets 0, Bytes 0
Out Scheduler Drops Conformed Packets 0, Bytes 0
Out Scheduler Drops Exceeded Packets 0, Bytes 0
Out Policed Packets 0
Out Discarded Packets 0
Out Fabric Dropped Packets 0
Meaning Table 98 on page 499 lists the show ip vrf command output fields.
Table 98: show ip vrf Output Fields
Field DescriptionField Name
Name of each VRFVRF Name
Default route distinguisher for the VRFDefault RD
Interfaces configured for the VRFInterfaces
Name of the VRFVRF
IP address that uniquely identifies the routerVRF IP Router Id
Time to live value in the IP headerDefault TTL
Value to time out reassembled packetsReassemble Timeout
Interface configured for the VRFInterface Configured
499Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Monitoring BGP/MPLS VPNs
To Next Page
Loading...
Need help?
General
