Export VPN Route Target Extended Communities:
100:2
Import Route-map : importmap1
Export Route-map : exportmap23 (can filter routes)
Global Import Route-map : globalimportmap2
Global Export Route-map : globalexportmap3
VRF pe13; Default RD 100:13
VRF IP Router Id: 10.13.13.1
Default TTL: 127
Reassemble Timeout: 30
Interface Configured:
null0 ATM2/0.13 tun mpls:vpnEgL19-5 ip dyn-26
Import VPN Route Target Extended Communities:
100:3
Export VPN Route Target Extended Communities:
100:3
No Import Route-map
No Export Route-map
No Global Import Route-map
No Global Export Route-map
To display summary information about all interfaces associated with all VRFs configured
in a virtual router:
host1:PE1#show ip vrf interfaces
Interface IP-Address Status Protocol VRF
null0 255.255.255.255/32 up up pe11
atm4/0.134 4.4.4.2/24 up up pe11
null0 255.255.255.255/32 up up pe12
ip0 6.6.6.8/24 up up pe12
null0 255.255.255.255/32 up up pe13
loopback1 7.7.7.2/24 up up pe13
To display detailed information about the interfaces:
host1:PE1#show ip vrf interfaces detail
null0 is up, line protocol is up
VRF: pe11
Link up/down trap is disabled
Internet address is 255.255.255.255/255.255.255.255
IP statistics:
Rcvd: 0 local destination
0 hdr errors, 0 addr errors
0 unkn proto, 0 discards
Frags: 0 reasm ok, 0 reasm req, 0 reasm fails
0 frag ok, 0 frag creates, 0 frag fails
Sent: 0 generated, 0 no routes, 0 discards
ICMP statistics:
Rcvd: 0 errors, 0 dst unreach, 0 time exceed
0 param probs, 0 src quench, 0 redirect,
0 echo req, 0 echo rpy
0 timestmp req, 0 timestmp rpy
0 addr mask req, 0 addr mask rpy
Sent: 0 errors, 0 dst unreach, 0 time excd
0 param probs, 0 src qnch, 0 redirect
0 timestamp req, 0 timestamp rpy
0 addr mask req, 0 addr mask rpy
atm4/0.134 is up, line protocol is up
VRF: pe11
Link up/down trap is disabled
Internet address is 4.4.4.2/255.255.255.0
IP statistics:
Rcvd: 0 local destination
Copyright © 2010, Juniper Networks, Inc.498
JunosE 11.2.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
