Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Action To display information about RSVP-TE graceful restart:
host1#show mpls rsvp hello graceful restart
Graceful restart is ON
Warning: Graceful restart is NOT active
Warning: Hellos not configured on all interfaces
Restart time 60000 milliseconds
Recovery time 120000 milliseconds
Meaning Table 85 on page 366 lists the show mpls rsvp hello graceful restart command output
fields.
Table 85: show mpls rsvp hello graceful restart Output Fields
Field DescriptionField Name
State of graceful restart, ON or OffGraceful-restart
State of graceful restart attributesWarning
Graceful restart time, in millisecondsRestart time
Graceful restart recovery time, in millisecondsRecovery time
Related Topics show mpls rsvp hello graceful restart•
Monitoring RSVP-TE Hello Adjacency Instances
Purpose Display summary or detailed information about RSVP-TE hello adjacency instances.
Action To display summary information about RSVP-TE hello adjacency instances:
host1#show mpls rsvp hello instance
Up – neighbor is up
GR – graceful restart is in progress
Peer
Address Interface Interval Miss Limit State
-------- --------- -------- ---------- ------
10.1.1.2 ATM6/1.1 10000 4 Up
10.3.1.2 ATM6/0.3 10000 4 GR
The following output shows that the two peers are identified as RSVP-TE node hellos
peers:
host1#show mpls rsvp hello instance
Up – neighbor is up
GR – graceful restart is in progress
Peer
Address Interface Interval Miss Limit State
-------- --------- -------- ---------- ------
10.1.1.2 <any> 10000 4 Up
10.3.1.2 <any> 10000 4 GR
11.2.3.1 Atm3/1.3 10000 4 GR
To display detailed information about RSVP-TE hello adjacency instances:
Copyright © 2010, Juniper Networks, Inc.366
JunosE 11.2.x BGP and MPLS Configuration Guide

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English