Table 86: show mpls rsvp hello instance Output Fields (continued)
Field DescriptionField Name
Graceful restart in progress. The hello sequence number from the
peer changed. The router is in graceful restart helper mode and
actively sending hellos to the peer.
GR
Hellos were received from the peer. The router is actively sending
hellos to the peer.
Up
IP address of remote hello adjacency peerNeighbor
IP address of the local hello adjacency peerLocal Address
Graceful restart time, in millisecondsRestart Time
Graceful restart recovery time, in millisecondsRecovery Time
Nonzero 32-bit value that represents the sender's hello instance.
The value is maintained on a per-neighbor basis. This instance value
changes only when the sending peer resets, when the sender’s router
reboots, or when communication is lost between the hello adjacency
peers.
SrcInstance
32-bit SrcInstance value most recently received from hello
adjacency peer; value is zero when no instance has been received
from that peer
DstInstance
Number of hello messages sentHellos Sent
Number of hello messages receivedHellos Received
Number of hello messages suppressed; message generation is
suppressed when a hello request object is received from the
destination node within the hello interval
Hellos Suppressed
Number of acknowledgments sent in response to hello requests
received
Hellos Acks Sent
Number of acknowledgments received in response to hello requests
sent
Hellos Acks Received
Related Topics show mpls rsvp hello instance•
Monitoring Status and Configuration for MPLS Tunnels
Purpose Display status and configuration for all tunnels or for a specific tunnel in the current router
context.
Action To display the status and configuration for all tunnels:
Copyright © 2010, Juniper Networks, Inc.368
JunosE 11.2.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
