Table 79: show mpls phb-id Output Fields
Field DescriptionField Name
Per-hop behavior ID for which a traffic class/color combination is
displayed
phb-id
Traffic class associated with traffictraffic-class
Color (drop precedence) associated with traffic, green, yellow, or
red
color
Related Topics show mpls phb-id•
Monitoring RSVP-TE Profiles and MPLS Tunnel Profiles
Purpose Display a specific RSVP-TE or tunnel profile, or all RSVP-TE or tunnel profiles.
Action To display the default RSVP-TE profile:
host1:pe2#show mpls rsvp profile default
RSVP profile default: used by 0 interfaces
refresh period: 30000 ms
timeout factor: 3
To display all MPLS tunnel profiles:
host1#show mpls tunnels profile
MPLS Tunnel Profile tunnelProfile
LSP setup using rsvp-te
tunnel not announced to any IGP
(Global) Retry forever
at (Global) interval 5 during Lsp setup if there is route
(Global) Retry forever
at (Global) interval 5 during Lsp setup if there is no route
metric is relative 0
path option 2
path to be dynamically calculated by isis
destinations include: 1.1.1.1 2.2.2.2 3.3.3.3
ISIS Level 2 routers
OSPF border routers
Meaning Table 80 on page 357 lists the show mpls profile command output fields.
Table 80: show mpls profile Output Fields
Field DescriptionField Name
Number of interfaces that use the profileprofile
Timeout period in seconds between generation of refresh messagesrefresh-period
Number of refresh messages that can be lost before the session is
ended
timeout factor
357Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Monitoring MPLS
To Next Page
Loading...