Table 128: show ip bgp next-hops Output Fields (continued)
Field DescriptionField Name
Index number of the MPLS indirect next hop that corresponds to
the BGP indirect next hop and its resolution
MPLS indirect next-hop
index
Indicates whether or not the indirect next hop is reachable. For more
information about the reachability rules that apply for various route
types, see the command description for show ip bgp next-hops
Reachable
Metric number of the BGP indirect next hopmetric
Number of the equal-cost legs of direct next hops to which this
indirect next hop resolves
Number of direct next-hops
MPLS next-hop index that resolves the MPLS indirect next hopDirect next-hop
Number of label mappings of BGP routes that use this next hopReference count
Related Topics show ip bgp next-hops•
Monitoring LDP-Related Settings for VPLS
Purpose Display MPLS configuration information for a VPLS instance that uses LDP as the signaling
protocol.
Action To display information for all VPLS instances configured on the virtual router:
host1:ve1#show ldp vpls
Vpls Vpls Remote
Instance Id PE In-label Out-label
-------- ---- ------- -------- ---------
vpls1 1 2.2.2.2 25 27
vpls2 2 2.2.2.2 26 28
Meaning Table 129 on page 630 lists the show ldp vpls command output fields.
Table 129: show ldp vpls Output Fields
Field DescriptionField Name
Name of the VPLS instance for which the configuration information
is displayed
Vpls Instance
Globally unique identifier for the VPLS domainVpls Id
IP address of the remote VE (also known as the PE) routerRemote PE
Incoming MPLS label from the remote siteIn-label
Outgoing MPLS label used to reach the remote siteOut-label
Copyright © 2010, Juniper Networks, Inc.630
JunosE 11.2.x BGP and MPLS Configuration Guide
To Next Page
Loading...
Need help?
General
