host1:two# show mpls forwarding brief
Platform label space
…
L2transport
Interface Owner Action
-------------------- -------- -------------------------------------------------------------------
ATM6/0.101 ldp l2transport to ATM6/2.101
l2transport to ATM6/2.103
ATM6/2.101 ldp l2transport to ATM6/0.101
l2transport to ATM6/2.103
ATM6/2.103 ldp l2transport to ATM6/0.101
l2transport to ATM6/2.101
Traffic that arrives on interface 6/0.101 is forwarded by means of ECMP to both interface
6/2.101 and interface 6/2.103. Traffic that arrives on interface 6/2.101 is forwarded by
means of ECMP to interface 6/0.101 and interface 6/2.103. Traffic that arrives on interface
6/2.103 is forwarded by means of ECMP to interface 6/0.101 and 6/2.101.
Load-Balancing Group Configuration
Load-balancing groups are a legacy method of configuring CE-side load balancing. It
was the only method available before Release 7.1.0. Load-balancing groups enable you
to configure attributes for a group that are inherited by the member shim interfaces.
Figure 120: CE-Side Load-Balancing Topology
541Copyright © 2010, Juniper Networks, Inc.
Chapter 9: Configuring Layer 2 Services over MPLS
To Next Page
Loading...