Juniper JUNOSE 11.2.X BGP AND MPLS

•
Clearing All Dynamic MAC Addresses for a Network Interface associated with a VPLS
Instance on page 611
•
Clearing All Dynamic MAC Addresses for the VPLS Virtual Core Interface associated
with a VPLS Instance on page 611
Clearing All Dynamic MAC Addresses from the VPLS Forwarding Table
To clear all dynamic MAC address entries for the VPLS instance:
•
Issue the clear bridge command.
host1#clear bridge vplsB
Clearing a Specific Dynamic MAC Addresses from the VPLS Forwarding Table
To clear a specific dynamic MAC address entry for the VPLS instance:
•
Issue the clear bridge address command.
host1#clear bridge vplsB address 0090.1a40.9992
Clearing All Dynamic MAC Addresses for a Network Interface associated with a VPLS Instance
To clear all dynamic MAC address entries for a network interface associated with a VPLS
instance:
•
Issue the clear bridge interface command.
host1#clear bridge interface atm 3/3.2
Clearing All Dynamic MAC Addresses for the VPLS Virtual Core Interface associated with a
VPLS Instance
To clear all dynamic MAC address entries for the VPLS virtual core interface associated
with a VPLS instance:
•
Issue the clear bridge interface vpls command.
host1#clear bridge interface vpls vplsA
Related Topics clear bridge•
• clear bridge address
• clear bridge interface
• clear bridge interface vpls
611Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Monitoring VPLS