Action To display information about routes that have inconsistent AS-paths:
host1#show ip bgp inconsistent-as
Local BGP identifier 192.168.1.10, local AS 123
0 routes (0 bytes used), 0 distinct destinations (0 bytes used)
0 routes selected for route table installation
0 path attribute entries (0 bytes used)
Status codes: > best, * invalid, s suppressed, d dampened, r rejected
Prefix Next-hop MED LocPrf Weight AS-path
> 4.0.0.0/8 0.0.0.0 1 32768 empty
4.0.0.0/8 192.168.1.1 0 11488 701 1
Meaning Table 34 on page 179 lists the show ip bgp inconsistent-as command output fields.
Table 34: show ip bgp inconsistent-as Output Fields
Field DescriptionField Name
BGP router ID of the local routerLocal BGP identifier
Local autonomous system numberlocal AS
Total number of routes stored in the BGP routing table and amount
of memory consumed by routes. If several peers have advertised a
route to the same prefix, all routes are included in this count.
routes
Number of routes to unique prefixes stored in the BGP routing table.
If several peers have advertised a route to the same prefix, only the
best route is included in this count.
distinct destinations
Number of routes in the BGP routing table that have been inserted
into the IP routing table
routes selected for route
table installation
Number of distinct path attributes stored in BGP's internal path
attributes table. If BGP receives two routes for different prefixes
but with identical path attributes, BGP will create only one entry in
its internal path attribute table and share it between the two routes
to conserve memory.
path attribute entries
Prefix for the routing table entryPrefix
IP address of the next hopNext hop
Multiexit discriminator for the routeMED
Local preference for the routeLocPrf
Assigned path weightWeight
Origin of the routeOrigin
AS-path through which this route bas been advertisedAS-path
179Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Monitoring BGP
To Next Page
Loading...
Need help?
General
