Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Table 100: show mpls tunnels Output Fields (continued)
Field DescriptionField Name
Number of octets sent across tunneloctets
Number of high-capacity (64-bit) octets sent across tunnelhcoctets
Number of packets that are dropped for some reason before being
sent
errors
Number of packets that are discarded due to lack of buffer space
before being sent
discardPkts
List of labels associated with the variable interface; one will be
selected to be prepended to packets before being sent across tunnel
Labels
Related Topics show mpls tunnels•
Disabling the MP-BGP Events Log Display
To disable the display of information about MP-BGP logs that was previously enabled
with the debug ip mbgp command
•
Issue the undebug ip mbgp command:
host1#undebug ip mbgp
Related Topics • Enabling the MP-BGP Events Log Display on page 489
• undebug ip mbgp
• debug ip mbgp
Copyright © 2010, Juniper Networks, Inc.506
JunosE 11.2.x BGP and MPLS Configuration Guide

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English