EasyManuals Logo
Home>Juniper>Software>JUNOSE 11.2.X BGP AND MPLS

Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Juniper JUNOSE 11.2.X BGP AND MPLS
742 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #536 background imageLoading...
Page #536 background image
Table 98: show ip vrf Output Fields (continued)
Field DescriptionField Name
List of VPNs from which the VRF accepts routing informationImport VPN Route Target
Extended Communities
List of VPNs to which the VRF sends update messagesExport VPN Route Target
Extended Communities
Route map associated with the VRF that filters and modifies routes
imported to the VRF from the global BGP VPN RIB. The map applies
to both IPv4 and IPv6 routes, unless the field name is preceded by
IPv4 (applies the map to only IPv4 routes) or IPv6 (applies the map
to only IPv6 routes)
Import Route-map
Route map associated with the VRF that modifies and filters routes
exported by the VRF to the global BGP VPN RIB. The map applies
to both IPv4 and IPv6 routes, unless the field name is preceded by
IPv4 (applies the map to only IPv4 routes) or IPv6 (applies the map
to only IPv6 routes). The can filter routes text appears only if the
filter keyword was issued for export map.
Export Route-map
Route map associated with the VRF that modifies routes imported
to the VRF from the global BGP non-VPN RIB. The map applies to
both IPv4 and IPv6 routes, unless the field name is preceded by
IPv4 (applies to only IPv4 routes) or IPv6 (applies to only IPv6
routes).
Global Import Route-map
Route map associated with the VRF that modifies routes exported
by the VRF to the global BGP non-VPN RIB. The map applies to
both IPv4 and IPv6 routes, unless the field name is preceded by
IPv4 (applies the map to only IPv4 routes) or IPv6 (applies the map
to only IPv6 routes).
Global Export Route-map
IP address of the interfaceIP-Address
Status of the interfaceStatus
Status of the line protocolProtocol
Number of packets and bytes forwarded into an output IP interfaceIn Forwarded Packets,
Bytes
Total number of packets and bytes discarded on a receive IP
interface
In Total Dropped Packets,
Bytes
Number of packets discarded on the ingress interface because of
a configuration problem rather than a problem with the packet itself
In Discarded Packets
Number of packets discarded on a receive IP interface because of
internal fabric congestion
In Fabric Dropped Packets
Number of packets and bytes requested to be forwarded out an IP
interface
Out Requested Packets,
Bytes
Copyright © 2010, Juniper Networks, Inc.500
JunosE 11.2.x BGP and MPLS Configuration Guide

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOSE 11.2.X BGP AND MPLS and is the answer not in the manual?

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General IconGeneral
BrandJuniper
ModelJUNOSE 11.2.X BGP AND MPLS
CategorySoftware
LanguageEnglish

Related product manuals