Table 98: show ip vrf Output Fields (continued)
Field DescriptionField Name
Total number packets and bytes dropped by an IP interface on
output
Out Total Dropped
Packets, Bytes
Number of packets discarded on the egress interface because of a
configuration problem rather than a problem with the packet itself
Out Discarded Packets
Number of packets dropped because of internal fabric congestionOut Fabric Dropped
Packets
Name of the VRF with which the interface is associatedVRF
IP Statistics Rcvd
Frames with this router as their destinationlocal destination
Number of packets containing header errorshdr errors
Number of packets containing addressing errorsaddr errors
Number of packets received containing unknown protocolsunkn proto
Number of discarded packetsdiscards
IP Statistics Frags
Number of reassembled packetsreasm ok
Number of requests for reassemblyreasm req
Number of reassembly failuresreasm fails
Number of packets fragmented successfullyfrag ok
Number of frames requiring fragmentationfrag creates
Number of packets unsuccessfully fragmentedfrag fails
IP Statistics Sent
Number of packets generatedgenerated
Number of packets that could not be routedno routes
Number of packets that could not be routed that were discardeddiscards
ICMP Statistics Rcvd
Number of error packets receivederrors
Number of packets received with destination unreachabledst unreach
501Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Monitoring BGP/MPLS VPNs
To Next Page
Loading...
Need help?
General
