Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Table 98: show ip vrf Output Fields (continued)
Field DescriptionField Name
Number of packets received with time-to-live exceededtime exceed
Number of packets received with parameter errorparam probs
Number of source quench packets receivedsrc quench
Number of receive packet redirectsredirect
Number of echo request (PING) packetsecho req
Number of echo replies receivedecho rpy
Number of requests for a timestamptimestamp req
Number of replies to timestamp requeststimestamp rpy
Number of address mask requestsaddr mask req
Number of address mask repliesaddr mask rpy
ICMP Statistics Sent
Number of error packets senterrors
Number of packets sent with destination unreachabledst unreach
Number of packets sent with time-to-live exceededtime exceed
Number of packets sent with parameter errorparam probs
Number of source quench packets sentsrc quench
Number of send packet redirectsredirect
Number of requests for a timestamptimestamp req
Number of replies to timestamp requeststimestamp rpy
Number of address mask requestsaddr mask req
Number of address mask repliesaddr mask rpy
Related Topics show ip vrf•
Copyright © 2010, Juniper Networks, Inc.502
JunosE 11.2.x BGP and MPLS Configuration Guide

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English