Table 123: show bridge port Output Fields (continued)
Field DescriptionField Name
Maximum number of dynamic MAC addresses that the interface
can learn
Max Learn
Name of the subscriber policy currently in effect for the interfaceSubscriber Policy
Displays statistics information for the specified portStatistics
Number of octets received on this interfaceIn Octets
Number of frames received on this interfaceIn Frames
Number of incoming packets discarded on this interfaceIn Discards
Number of incoming errors received on this interfaceIn Errors
Number of octets transmitted on this interfaceOut Octets
Number of frames transmitted on this interfaceOut Frames
Number of outgoing packets discarded on this interfaceOut Discards
Number of outgoing errors on this interfaceOut Errors
Elapsed time since statistics counters were last resetTime since counters last
reset
Hardware packet queue associated with the specified traffic class
and interface
queue
Length of the queue, in bytesQueue length
Number of packets and bytes forwarded on this queueForwarded packets, bytes
Number of committed packets and bytes that were droppedDropped committed
packets, bytes
Number of conformed packets and bytes that were droppedDropped conformed
packets, bytes
Number of exceeded packets and bytes that were droppedDropped exceeded
packets, bytes
Identifies the VPLS virtual core interface for the VPLS instancevpls vplsName
Table 124 on page 624 lists the show bridge port brief command output fields.
623Copyright © 2010, Juniper Networks, Inc.
Chapter 13: Monitoring VPLS
To Next Page
Loading...