EasyManuals Logo
Home>Juniper>Software>JUNOSE 11.2.X BGP AND MPLS

Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Juniper JUNOSE 11.2.X BGP AND MPLS
742 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #199 background imageLoading...
Page #199 background image
host1:pe1#show ip bgp 10.88.88.1
BGP route information for prefix 10.88.88.1/32
Network route (best route
Advertised to both internal and external peers
Address Family Identifier (AFI) is ip-v4
Subsequent Address Family Identifier (SAFI) is unicast
Next hop IP address is 0.0.0.0 (metric 2)
Multi-exit discriminator is 1
Local preference is not present
Weight is 32768
Origin is IGP
AS path is empty
Extended communities empty
To display information about routes for the specified IPv6 prefix:
host1:pe1#show bgp ipv6 2001:0430::1/128
BGP route information for prefix 2001:1::1/128
Received route learned from internal peer 2.2.2.2 (best route)
Route placed in IP forwarding table
Best to advertise to external peers
Address Family Identifier (AFI) is ip-v6
Subsequent Address Family Identifier (SAFI) is unicast
MPLS in-label is none
MPLS out-label is 17
Next hop IP address is ::ffff:2.2.2.2 (metric 3)
Multi-exit discriminator is 0
Local preference is 100
Weight is 0
Origin is IGP
AS path is 65021
To display information about next hop routers for VRF PE 11 in the IPv4 VPN address
family:
host1:pe1#show ip bgp vpnv4 vrf pe11 next-hops
Indirect next-hop 11.11.11.2
Resolution in IP route table of VR pe11
Reachable (metric 0)
IP indirect next-hop index 35
Direct next-hop ATM2/0.11 (11.11.11.2)
Resolution in IP tunnel-route table of VR pe11
Not reachable
Reference count is 1
Indirect next-hop 2.2.2.2
Resolution in IP route table of VR pe1
IP indirect next-hop index 123
Reachable (metric 100)
Direct next-hop POS4/0 (10.10.10.1)
POS4/1 (12.12.12.1)
Resolution in IP tunnel-route table of VR pe1
MPLS indirect next-hop index 578
Reachable (metric 100)
Direct next-hop Push 23, POS4/0 (10.10.10.1)
Push 43, POS4/1 (12.12.12.1)
Reference count is 1
To display information about routes in the route-target address family:
163Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Monitoring BGP

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper JUNOSE 11.2.X BGP AND MPLS and is the answer not in the manual?

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General IconGeneral
BrandJuniper
ModelJUNOSE 11.2.X BGP AND MPLS
CategorySoftware
LanguageEnglish

Related product manuals