Juniper JUNOSE 11.2.X BGP AND MPLS User Manual

Table 81: show mpls rsvp Output Fields (continued)
Field DescriptionField Name
Next hop addressm_ipNextHopAddr
Type of next hop (loose, strict, session)NextHop
RSVP session label rangeLabelRange
Traffic parameters for the senderSenderTSpec
Sender's description of generated traffic, in kbpsToken Bucket Rate
Sender's description of generated traffic, in kbpsToken Bucket Size
Lender's peak traffic generation ratePeak Data Rate
Minimum packet size generated by senderMin Policed Unit
Maximum packet size generated by senderMax Packet Size
Record route objectRRO
Indicates presence of this QoS objectADSPEC
Incoming explicit route objectIN ERO
Outgoing explicit route objectOUT ERO
RSVP session attributesSES ATTR
Setup priority of tunnelSetup Pri
Hold priority of tunnelHold Pri
Name of the tunnelname
One or more of the IngressReRoute (the ingress router can reroute
the LSP), Local Protection (routers can use local repair mechanism
to fix the LSP; this fix might violate the explicit route object
associated with the LSP), and MergingPermitted (LSPs can be
merged) flags
Flags
Indicates presence of the traffic trunk classifier objectTTC
Indicates presence of the policy objectPolicy Object
Indicates presence objects not defined by the RSVP specificationUnknown Objects
PSB in usePSB Flag InUse
Copyright © 2010, Juniper Networks, Inc.360
JunosE 11.2.x BGP and MPLS Configuration Guide

Juniper JUNOSE 11.2.X BGP AND MPLS Specifications

General

Brand	Juniper
Model	JUNOSE 11.2.X BGP AND MPLS
Category	Software
Language	English